If you have fine thin hair with little body and hair volume then Clip On Extensions are exactly what you need. All you need to do is part your hair where you wish to add hair and then clip Extension Fillers in place to add body and volume to your own hair. It’s a fast… easy… and fun way to create beautiful hairstyles at a moments notice!

CLIP ON HAIR EXTENSION FILLERS

To create Clip On Extensions Fillers use the following steps.

Using hair as long as desired with 1” to 2” lengths weft strips:
* Wash and dry weft hair before you begin.
* Fold weft hair end-to-end.
* Apply adhesive to sewn end of weft strip. Allow adhesive to dry:
* Sew bonded end of weft strip to 1 - medium or large Attachment Comb Clip (Toupee Clips)

Styling hair:
* Set and style hair as desired.

Attaching Clip On Extensions Fillers for wearing:
* Simply insert Extension Fillers where desired and snap comb closed to secret for wearing.
* Place as desired to create your favorite hairstyles.
* Comb and style as desired.

OUR UTLRA THIN SOLID GRIP CLIP

1. Open the clip on your Hair Extension Fillers by holding the top section and gently pulling backward by placing a finger on each end of the clip.
2. Locate the area where you want to insert. Using a brush or comb or your fingers, part your hair and lift the section up and pin or clip it out of the way. Slide the clip into place by pressing on both sides - make sure the section is lying flat. When you hear it click, you will know it is secure. Run your fingers across the top to make sure the section is lying flat.
3. Now comb your own hair down over the Hair Extension Fillers and gently comb to blend hair:
4. Now repeat these same steps using as many of the sections as you wish to achieve the amount of volume desired.

HOW TO REMOVE YOUR HAIR EXTENSION FILLERS

Simply open the clip by gently pulling backwards until you hear the clip release. Then gently remove the section being careful not to pull your hair. It is suggested to move the placement of your sections slightly every couple of wearings. This will allow the clip to rest in a different area preventing too much stress in your hair.

HOW TO CREATE FULLNESS AND LENGTH
Length may be created by suing the larger 8” sections on the back starting 2 fingers width above the back hair line and placing the second 8” section two fingers width above the first section. Length and fullness may be created by combing the above techniques along with the instruction listed below. To create fullness, start with the back sections and build up from the nape area, using your two fingers as a guide. Insert the 8” section in the back first. After this is secure, move to the next section, inserting the 6” section in the back side (one on each side at least two fingers above the first section). Then move to the front sides, these will add additional style and help create fullness in these areas as well.

QUESTIONS ABOUT MY HAIR EXTENSION FILLERS

Q. What about showering or swimming with my Hair Enhancers?
A. Due to the nature of the Hair Extension Fillers - we DO NOT recommend this.

Q. Do I have to use all the sections every time I wear my Hair Extension Fillers ?
A. No. You may customize your look by suing different combinations of sections in different areas.

Q. Why is my Hair Extension Fillers not cut with a straight edge?
A. The fringed edges allow for better blending. Should you desire a blunt cut, you may have the edges
trimmed slightly.

Q. Can I use more than one color of Hair Extension Fillers at the same time?
A. Yes! You can choose a color of a as shade darker or lighter than your own hair. This will create low
lights or high lights (you can order a second set of Hair Extension Fillers for the purpose of highlighting).

Mini

Toupee Clip

Medium

Toupee Clip

100% Non-Cutilce B/W

Human Hair

100% Remy Straight Human Hair

CARE & MAINTENANCE OF YOUR HAIR ENHANCERS

Washing: Shampooing should be done only after 4 - 5 uses. Use a gentle flow of water holding your Hair Extension Fillers by the clip allowing the water to run down the hair shafts (do not scrunch or tangle hair). Apply a very small amount of Farouk Shampoo purchased from B Bizzarre and gently work it through with your fingers and rinse thoroughly in the same manner as above.

Conditioning: Remove excess moisture with your fingers and apply a small amount of Farouk Conditioners through your hair. Allow it to set for 1 to 2 minutes. Work the conditioner through gently with your fingers and then rinse through. Gently blot dry to remove excess moisture.

Drying: Use a wide tooth comb and very gently comb hold from the clip. Start with the ends and work upward to remove any tangles ( being careful not to pull to hard). We recommend you let your hair air dry. If you do choose to blow dry, use the cool setting and Farouk Keratin Mist for protection against the heat of the dryer.

Storage: Never store your Hair Extension Fillers in a plastic package or store wet.. Allow them to fully dry and then store them.